Oil Extraction Machine

Product Details:

 100 to 200 ltr capacity per hr, 1 HP motor, OIL FILTERING MACHINE. 50 TO 70 LTR/ HOUR, P P FILTER 18/18 - 5 PLATES LAYER..FOODGRADE STEELS USED/ WITH MOTOR.

Additional Information:

• Delivery Time: 20 DAYS

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

Gingelly Seed Oil Extraction Machine Coimbatore

Product Details:

30 KG Kachi Ghani Mustard Oil Machine Coimbatore

Product Details:

[10:58 AM, 9/3/2023] Perfect Engineerings, Chandru. Coimbatore: Perfect Automatic Marrachekku machine specification;
1). Energy Efficiency IE 2 grade Siemens motor 3 hp 960 rpm 3 phase motor,2) New Bonfigloli Italian brand Gear box (Heavy duty / Imported),3) EN 8 grade main Shaft provided for more strength and durability. 4). Well matured Seasoned VAGAAI wood (traditionally believed it's having medicinal benefits) is used  provided for Bottom Ural (Mortar) and Top crushing Crusher (Pestle).5). 304 Grade Stainless steel is used for Seed putting Hopper and Oil collection Tray.6). Imported Mitsuboshi brand V Belts used for longer durability. 6).Trouble free model. Can be operated by Ladies also. 4 to 5 machines can be looked after by a single women. 7) All types of Seeds can be crushed from 5kg  to 20 kg in one batc…[10:58 AM, 9/3/2023] Perfect Engineerings, Chandru. Coimbatore: Major Difference between Automatic Marrachekku Machine of Perfect Engineerings and other, are as follows:1. We use 6 mm thickness sheets for Loading bearing areas in the Machine. ( Other companies use only 4 mm sheet).2. We Use 16 mm thickness Plate for White Roller Holders, as it takes heavy load, while crushing. ( Others use 10 mm only).3. We use 50 mm Round Rod for Screw Rod. Round Rod will give better action, than Square. ( Others use only 40 mm Square Rod).4. We Use EN 19 Grade  material for Main Shaft. We use certified Lengthy Springs. And Our Small Spring Setup has Oscillation Setup.(Others Small Spring Set up is fixed).5. Since we use well matured Wood, Our Top Crusher Wood (Pestle) is heavier(weighs around 15 to 17 kg.). (Others are not as heavy as that of us.)6. We Use Mitsuboshi - Japan Brand imported Belts, for longer life. This brand gives Triple the life of Fenner. (But others use only Local Belt.).6. Our machine is designed to give higher percentage of Oil out put. Totally Trouble free model. 7. We Provide Legs at the Bottom of the machine for Better Ventilation to the Motor and Gear box. And for easy cleaning, below the machine. (Others don't provide LEG.)8. We do customisation like Chainblock for Top Wood lifting, Wheels for moving, Colour options etc., as per customers requirement. ( Others don't do it). 9. Our delivery time is short. ( Others don't).10. Our SCRAPPER (Seed pulling- Hand mechanism inside Hopper) is Latest. It will NOT let the Seed to Over Flow outside. (Others provide Wood. This will obstructs the Seed Flow inside the machine and so spills out).11. We provide Groove in the Rear-side of the Mainshaft Flange, inorder to avoid spillage of Oil to the Gearbox  and belt fitted below it(Others won't provide it).12. Each and every part of the Main Body Frame is of Laser Cutting, So that the Machine Structure is of Perfect Shape and thereby the Belt Alignment is very accurate.13. SKF bearings are only used.14. TVS brand Bolts are only used in Vital places.15. Bottom Ural (Mild Steel casting) is made up of Highest Grade material (Fe 300), so that it gives longer life.16). 2 mm thick 304 Grade Seed putting Hooper and Oil Tray are only used. So this has Longer Life.

Additional Information:

• Item Code: PE-ROT-20
• Production Capacity: 1 TON
• Delivery Time: 15 WORKING DAYS

Product Details:

PERFECT Cold Pressed Oil Expeller, Specifications:1). 4 bolt Expeller with Varum Size 18 Inch Length and 3 Inch Chamber size.2). High Quality Varums. 3). Can crush all type of seed like Coconut, Groundnut, Sesame etc, withour applying Steam.4). Designed to give high Percenrage of Oil Output.5). Crushes about 40 to 50 Kg per hour based on the Seed variety.6). Maintenance free model.

Additional Information:

• Item Code: PE-EXP50
• Production Capacity: per day one
• Delivery Time: with in week

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

Major Difference between Automatic Marrachekku Machine of Perfect Engineerings and other, are as follows:

1. We use 6 mm thickness sheets for Loading bearing areas in the Machine. ( Other companies use only 4 mm sheet).

2. We Use 16 mm thickness Plate for White Roller Holders, as it takes heavy load, while crushing. ( Others use 10 mm only).

3. We use 50 mm Round Rod for Screw Rod. Round Rod will give better action, than Square. ( Others use only 40 mm Square Rod).

4. We Use EN 19 Grade  material for Main Shaft. We use certified Lengthy Springs. And Our Small Spring Setup has Oscillation Setup.(Others Small Spring Set up is fixed).

5. Since we use well matured Wood, Our Top Crusher Wood (Pestle) is heavier(weighs around 15 to 17 kg.). (Others are not as heavy as that of us.)

6. We Use Mitsuboshi - Japan Brand imported Belts, for longer life. This brand gives Triple the life of Fenner. (But others use only Local Belt.).

6. Our machine is designed to give higher percentage of Oil out put. Totally Trouble free model. 

7. We Provide Legs at the Bottom of the machine for Better Ventilation to the Motor and Gear box. And for easy cleaning, below the machine. (Others don't provide LEG.)

8. We do customisation like Chainblock for Top Wood lifting, Wheels for moving, Colour options etc., as per customers requirement. ( Others don't do it). 

9. Our delivery time is short. ( Others don't).

10. Our SCRAPPER (Seed pulling- Hand mechanism inside Hopper) is Latest. It will NOT let the Seed to Over Flow outside. (Others provide Wood. This will obstructs the Seed Flow inside the machine and so spills out).

11. We provide Groove in the Rear-side of the Mainshaft Flange, inorder to avoid spillage of Oil to the Gearbox  and belt fitted below it(Others won't provide it).

12. Each and every part of the Main Body Frame is of Laser Cutting, So that the Machine Structure is of Perfect Shape and thereby the Belt Alignment is very accurate.

13. SKF bearings are only used.

14. TVS brand Bolts are only used in Vital places.

15. Bottom Ural (Mild Steel casting) is made up of Highest Grade material (Fe 300), so that it gives longer life.

16). 2 mm thick 304 Grade Seed putting Hooper and Oil Tray are only used. So this has Longer Life.

Additional Information:

• Item Code: perfectawc20
• Production Capacity: 200 kg per day
• Delivery Time: 10 days

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

Major Difference between Automatic Marrachekku Machine of Perfect Engineerings and other, are as follows:

1. We use 6 mm thickness sheets for Loading bearing areas in the Machine. ( Other companies use only 4 mm sheet).

2. We Use 16 mm thickness Plate for White Roller Holders, as it takes heavy load, while crushing. ( Others use 10 mm only).

3. We use 50 mm Round Rod for Screw Rod. Round Rod will give better action, than Square. ( Others use only 40 mm Square Rod).

4. We Use EN 19 Grade  material for Main Shaft. We use certified Lengthy Springs. And Our Small Spring Setup has Oscillation Setup.(Others Small Spring Set up is fixed).

5. Since we use well matured Wood, Our Top Crusher Wood (Pestle) is heavier(weighs around 15 to 17 kg.). (Others are not as heavy as that of us.)

6. We Use Mitsuboshi - Japan Brand imported Belts, for longer life. This brand gives Triple the life of Fenner. (But others use only Local Belt.).

6. Our machine is designed to give higher percentage of Oil out put. Totally Trouble free model. 

7. We Provide Legs at the Bottom of the machine for Better Ventilation to the Motor and Gear box. And for easy cleaning, below the machine. (Others don't provide LEG.)

8. We do customisation like Chainblock for Top Wood lifting, Wheels for moving, Colour options etc., as per customers requirement. ( Others don't do it). 

9. Our delivery time is short. ( Others don't).

10. Our SCRAPPER (Seed pulling- Hand mechanism inside Hopper) is Latest. It will NOT let the Seed to Over Flow outside. (Others provide Wood. This will obstructs the Seed Flow inside the machine and so spills out).

11. We provide Groove in the Rear-side of the Mainshaft Flange, inorder to avoid spillage of Oil to the Gearbox  and belt fitted below it(Others won't provide it).

12. Each and every part of the Main Body Frame is of Laser Cutting, So that the Machine Structure is of Perfect Shape and thereby the Belt Alignment is very accurate.

13. SKF bearings are only used.

14. TVS brand Bolts are only used in Vital places.

15. Bottom Ural (Mild Steel casting) is made up of Highest Grade material (Fe 300), so that it gives longer life.

16). 2 mm thick 304 Grade Seed putting Hooper and Oil Tray are only used. So this has Longer Life.on machine 

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

Major Difference between Automatic Marrachekku Machine of Perfect Engineerings and other, are as follows:

1. We use 6 mm thickness sheets for Loading bearing areas in the Machine. ( Other companies use only 4 mm sheet).

2. We Use 16 mm thickness Plate for White Roller Holders, as it takes heavy load, while crushing. ( Others use 10 mm only).

3. We use 50 mm Round Rod for Screw Rod. Round Rod will give better action, than Square. ( Others use only 40 mm Square Rod).

4. We Use EN 19 Grade  material for Main Shaft. We use certified Lengthy Springs. And Our Small Spring Setup has Oscillation Setup.(Others Small Spring Set up is fixed).

5. Since we use well matured Wood, Our Top Crusher Wood (Pestle) is heavier(weighs around 15 to 17 kg.). (Others are not as heavy as that of us.)

6. We Use Mitsuboshi - Japan Brand imported Belts, for longer life. This brand gives Triple the life of Fenner. (But others use only Local Belt.).

6. Our machine is designed to give higher percentage of Oil out put. Totally Trouble free model. 

7. We Provide Legs at the Bottom of the machine for Better Ventilation to the Motor and Gear box. And for easy cleaning, below the machine. (Others don't provide LEG.)

8. We do customisation like Chainblock for Top Wood lifting, Wheels for moving, Colour options etc., as per customers requirement. ( Others don't do it). 

9. Our delivery time is short. ( Others don't).

10. Our SCRAPPER (Seed pulling- Hand mechanism inside Hopper) is Latest. It will NOT let the Seed to Over Flow outside. (Others provide Wood. This will obstructs the Seed Flow inside the machine and so spills out).

11. We provide Groove in the Rear-side of the Mainshaft Flange, inorder to avoid spillage of Oil to the Gearbox  and belt fitted below it(Others won't provide it).

12. Each and every part of the Main Body Frame is of Laser Cutting, So that the Machine Structure is of Perfect Shape and thereby the Belt Alignment is very accurate.

13. SKF bearings are only used.

14. TVS brand Bolts are only used in Vital places.

15. Bottom Ural (Mild Steel casting) is made up of Highest Grade material (Fe 300), so that it gives longer life.

16). 2 mm thick 304 Grade Seed putting Hooper and Oil Tray are only used. So this has Longer Life.

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

We are the leading manufacturer and supplier of Chekku Oil Extraction Machine and all type of oil mill machine and extraction machine 

Product Details:

Major Difference between Automatic Marrachekku Machine of Perfect Engineerings and other, are as follows:

1. We use 6 mm thickness sheets for Loading bearing areas in the Machine. ( Other companies use only 4 mm sheet).

2. We Use 16 mm thickness Plate for White Roller Holders, as it takes heavy load, while crushing. ( Others use 10 mm only).

3. We use 50 mm Round Rod for Screw Rod. Round Rod will give better action, than Square. ( Others use only 40 mm Square Rod).

4. We Use EN 19 Grade  material for Main Shaft. We use certified Lengthy Springs. And Our Small Spring Setup has Oscillation Setup.(Others Small Spring Set up is fixed).

5. Since we use well matured Wood, Our Top Crusher Wood (Pestle) is heavier(weighs around 15 to 17 kg.). (Others are not as heavy as that of us.)

6. We Use Mitsuboshi - Japan Brand imported Belts, for longer life. This brand gives Triple the life of Fenner. (But others use only Local Belt.).

6. Our machine is designed to give higher percentage of Oil out put. Totally Trouble free model. 

7. We Provide Legs at the Bottom of the machine for Better Ventilation to the Motor and Gear box. And for easy cleaning, below the machine. (Others don't provide LEG.)

8. We do customisation like Chainblock for Top Wood lifting, Wheels for moving, Colour options etc., as per customers requirement. ( Others don't do it). 

9. Our delivery time is short. ( Others don't).

10. Our SCRAPPER (Seed pulling- Hand mechanism inside Hopper) is Latest. It will NOT let the Seed to Over Flow outside. (Others provide Wood. This will obstructs the Seed Flow inside the machine and so spills out).

11. We provide Groove in the Rear-side of the Mainshaft Flange, inorder to avoid spillage of Oil to the Gearbox  and belt fitted below it(Others won't provide it).

12. Each and every part of the Main Body Frame is of Laser Cutting, So that the Machine Structure is of Perfect Shape and thereby the Belt Alignment is very accurate.

13. SKF bearings are only used.

14. TVS brand Bolts are only used in Vital places.

15. Bottom Ural (Mild Steel casting) is made up of Highest Grade material (Fe 300), so that it gives longer life.

16). 2 mm thick 304 Grade Seed putting Hooper and Oil Tray are only used. So this has Longer Life.

Product Details:

Rotary Oil Making Machine Coimbatore

Product Details:

[11:00 AM, 8/31/2023] Perfect Engineerings, Chandru. Coimbatore: Perfect Automatic Marrachekku machine specification;
1). Energy Efficiency IE 2 grade Siemens motor 3 hp 960 rpm 3 phase motor,2) New Bonfigloli Italian brand Gear box (Heavy duty / Imported),3) EN 8 grade main Shaft provided for more strength and durability. 4). Well matured Seasoned VAGAAI wood (traditionally believed it's having medicinal benefits) is used  provided for Bottom Ural (Mortar) and Top crushing Crusher (Pestle).5). 304 Grade Stainless steel is used for Seed putting Hopper and Oil collection Tray.6). Imported Mitsuboshi brand V Belts used for longer durability. 6).Trouble free model. Can be operated by Ladies also. 4 to 5 machines can be looked after by a single women. 7) All types of Seeds can be crushed from 5kg  to 20 kg in one batc…[11:00 AM, 8/31/2023] Perfect Engineerings, Chandru. Coimbatore: Major Difference between Automatic Marrachekku Machine of Perfect Engineerings and other, are as follows:1. We use 6 mm thickness sheets for Loading bearing areas in the Machine. ( Other companies use only 4 mm sheet).2. We Use 16 mm thickness Plate for White Roller Holders, as it takes heavy load, while crushing. ( Others use 10 mm only).3. We use 50 mm Round Rod for Screw Rod. Round Rod will give better action, than Square. ( Others use only 40 mm Square Rod).4. We Use EN 19 Grade  material for Main Shaft. We use certified Lengthy Springs. And Our Small Spring Setup has Oscillation Setup.(Others Small Spring Set up is fixed).5. Since we use well matured Wood, Our Top Crusher Wood (Pestle) is heavier(weighs around 15 to 17 kg.). (Others are not as heav…

Additional Information:

• Item Code: Perfect
• Production Capacity: 20 kg capacity
• Delivery Time: 10 days

Product Details:

20 KG Cold Press Oil Extractor Machine

Product Details:

Linseed Oil Extraction Machine Coimbatore

Product Details:

Mini Rotary Oil Mill Cold Press Machine 














































































































































































Mini Rotary Oil Mill Cold Press Machine 

Product Details:

Automatic Stone Cold Pressed Oil Machine 

Product Details:

Perfect Oil Extraction Machine Coimbatore

Product Details:

Rapeseed Oil Extraction Machine Manufacturers In Coimbatore 

Product Details:

Perfect Oil Extraction Machine Coimbatore 

Product Details:

Six bolt expeller. Specifications: Heavy Duty model, Crushes 70 to 80 kg seeds per hour. Requires 10 Hp 960 RPM motor. Electric Steamer of 6 KW Required. Weight 1000 Kg (approx.). Length 7 Feet, Width 4 Feet, Height 7 Feet. EN 8 Shaft. Branded Bearings. Double Hardened Worms with Hardened Key Set. Trouble free model Can be operated for 24 x 7,  without stopping the machin